EN
Home › Connectivity › Wi-Fi in a stone house

Wi-Fi through stone: how to cover the whole house

A gigabit at the front door and zero in the bedroom is a typical Kinta story. Solutions from simple to major.

Wi-Fi through stone: how to cover the whole house
Photo: Wikimedia Commons · CC BY-SA 2.5
Verified · October 2026
The main problemthick stone walls, different floors, extensions
Best solutionEthernet cable (Cat6) + access points
Without repairmesh system with wired connection of nodes or powerline
Frequencies2.4 GHz - further, 5 GHz - faster, but worse through walls
Operator routerplace it in the center of the house, not in a closet near the entrance
Street and terraceseparate outdoor access point

Why does the stone “eat up” Wi-Fi

Traditional houses in Portugal were built from granite, slate or limestone with walls 50–80 cm thick. Wi-Fi radio waves pass through such walls poorly, especially at the 5 GHz frequency, which gives maximum speed. Add different levels, vaulted ceilings and separate outbuildings (anexo, a former barn) - and one operator router is no longer enough.

Solution 1: Proper location for the router

The fiber optic cable is often installed at the entrance, and the technician places the router there. Ask to bring out the optics or extend the Ethernet cable to the central room. Do not hide the router in a closet, behind a TV, or near metal objects. It's free and sometimes solves half the problems.

Solution 2: mesh system

Mesh - several nodes that create one network with one name. An important nuance for a stone house: if the nodes are connected to each other by air through the same wall, the speed drops. The best option is a wired backhaul: the nodes are connected by cable, and Wi-Fi is distributed in each room. Then the speed is almost not lost. Many operators offer their mesh amplifiers for a fee.

Solution 3: powerline

Powerline adapters transmit the Internet via electrical wiring. This is a solution if there is no way to stretch the cable. But old wiring in rural homes and different electrical phases reduce efficiency - test before purchasing a large kit.

Solution 4: cable during repair

If the house is being restored, this is the best time to install a wired network: Cat6 cables in each work room, in extensions and to the camera installation site, plus a box to the roof for a future antenna or Starlink. The cost of the cable is minimal compared to the cost of repairs, and the result is stable gigabit in every room.

Extensions, terrace, swimming pool

For a guest house or workshop 20–50 m from the main house, use an outdoor access point or a point-to-point radio bridge - a pair of antennas with direct visibility. For the terrace and pool - an outdoor access point with protection from moisture and sun.

Frequently Asked Questions

Will a 20 € repeater help?

Sometimes, but it usually splits the speed in half and does not work well through a thick wall; mesh with wired connection is more reliable.

Do you need an electrician to install the cable?

For a low-current network - no, but during repairs it is better for the electrician and the network installer to work according to the same plan.

I have Starlink - will the same solutions work?

Yes. The Starlink router can be switched to bridge mode and connect your mesh system or access points via cable; The Max tariff already includes an additional mesh point.

How to protect your home network?

Change the default operator router password, use WPA2/WPA3 encryption and create a separate guest network for tenants, guests and smart devices.

Related guides

Need a rental with verified fast internet?

Our licensed partner pre-screens nomad rentals for real FTTH speeds and infrastructure — no more trusting “fast Wi-Fi” badges.

Get expert advice → →