EN
Home › Property › T0, T2+1, Área Bruta and Área Útil: How

T0, T2+1, Área Bruta and Área Útil: How to Read Floor Areas and Typologies in Portuguese Listings

A \"T2 de 95 m²\" can turn out to have 70 m² of living space. Here is which areas are quoted in Portugal and how to check them.

A T2 floor plan with room dimensions on a table
Фото: Wikimedia Commons · CC BY-SA 4.0
Verified · November 2026
T0studio: no separate bedroom
T1, T2, T3…number of bedrooms; living room and kitchen not counted
+1extra room that does not meet bedroom standards
Área bruta privativaarea measured to the outer walls, including walls and balconies
Área útilusable floor area inside the walls
Área dependentestorage, garage, terrace — outside the main area

Typologies

In Portugal a flat is described with the letter T (tipologia) and the number of bedrooms. T0 is a studio, T1 is one bedroom plus a living room, T3 is three bedrooms and a living room. Houses sometimes use V (vivenda): V3 is a three-bedroom house.

The typology in a listing does not always match the documents. If the tax record says T1 but the flat is sold as a "T2", the second bedroom was most likely created by an unlicensed alteration.

Types of area

Why the price per m² can mislead

An agent may divide the price by ABP plus ABD to make the price per metre look lower. A flat with a large terrace, on the other hand, looks more expensive per metre than it really is. Compare properties by área útil, or at least by ABP without the dependent spaces.

Example: a T2 for €380,000, ABP 92 m², ABD 18 m². The price per metre is €4,130 on ABP and €3,455 on the "total" 110 m². Yet the usable area may be about 75 m², which means €5,070 per usable metre.

How to check the area

  1. The caderneta predial at the tax office shows ABP and ABD, as well as the typology.
  2. The certidão permanente from the land registry shows the registered area.
  3. The energy certificate contains the usable floor area (área útil de pavimento).
  4. Ask for the floor plans (plantas) from the municipality and measure the flat with a laser meter at the viewing.

If the figures in the documents differ by more than a few per cent, find out why before signing the CPCV. Discrepancies arise from unlicensed extensions, enclosed balconies (marquises) or errors in old records.

Frequently asked questions (FAQ)

Does the area affect IMI?

Yes, the tax value (VPT) is calculated from ABP and ABD, so extra metres in the documents raise the tax.

Can a "+1" be legalised as a bedroom?

Only if the room meets the rules on size, ceiling height and window. The municipality decides.

Related guides

Unsure about a property's size?

Our partner will check the listed area against the land registry, the tax record and the plans.

Get expert advice →